Braven Brv 1M Sub Woofer Cone Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Sub-woofer Cone
• 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackBraven BRV-1M

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Sub-woofer Cone               

• To remove the outer rubber casing use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides, found on the bottom part of the device.

To remove the outer rubber casing use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides, found on the bottom part of the device.

1024

Step 2

• Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.
• A little resistance should be felt, but not enough to bend the spudger.

Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.

A little resistance should be felt, but not enough to bend the spudger.

Step 3

• To remove the hard inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the subwoofer on the top side of the device.

To remove the hard inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the subwoofer on the top side of the device.

Step 4

• Carefully lift away the broken sub-woofer plate of the device. Replace with functioning sub-woofer plate.

Carefully lift away the broken sub-woofer plate of the device. Replace with functioning sub-woofer plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Erik Oliva                     

Member since: 02/14/2018

607 Reputation

                                      6 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       USF Tampa, Team S2-G1, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S2-G1, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S2G1                     


                                            4 Members                     


                                            6 Guides authored