Difficulty

Moderate

Steps

4

Time Required

                          20 - 40 minutes

Sections

1

  • Bread Grabber Spring
  • 4 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackBrentwood TS-292B

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

When the toaster is used regularly or kept incorrectly, making the toaster inoperable, the spring may need to be replaced.

Furthermore, because the wire that works as the spring is difficult to bend into the precise shape, this repair may be challenging. This repair may require the use of large needle-nose pliers and a tweezer. This step-by-step instruction will show you how to get your toaster restored in working order.

Before beginning, make sure to power off your toaster completely and disconnect from any external power source.

What you need

Step 1

              Bread Grabber Spring
  • Turn the toaster upside down.
  • Remove the five 6 mm screws with a Phillips #2 screwdriver.

Turn the toaster upside down.

Remove the five 6 mm screws with a Phillips #2 screwdriver.

1024

Step 2

  • Grasp the plastic pull lever cover firmly and pull to remove it. This may require force.
  • Lift the cover upwards to remove it.
  • When removing the cover, do not damage the cable connector bundle that attaches the cover to the toaster.

Grasp the plastic pull lever cover firmly and pull to remove it. This may require force.

Lift the cover upwards to remove it.

When removing the cover, do not damage the cable connector bundle that attaches the cover to the toaster.

Step 3

  • To detach the bundled cable connector, carefully pull it away from the circuit board.

To detach the bundled cable connector, carefully pull it away from the circuit board.

Step 4

  • Pull the toaster lever down.
  • While holding the toaster lever down, use the spudger to pull the metal tabs away from the wired bread grabber.
  • Continuing to hold the toaster lever down, pinch the wires inward and pull up to carefully remove them from the toaster.

Pull the toaster lever down.

While holding the toaster lever down, use the spudger to pull the metal tabs away from the wired bread grabber.

Continuing to hold the toaster lever down, pinch the wires inward and pull up to carefully remove them from the toaster.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Elly Ayala

Member since: 09/21/2018

739 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of North Texas, Team S8-G7, Riccardelli Fall 2018                        

                                                  Member of University of North Texas, Team S8-G7, Riccardelli Fall 2018 



                    UNT-RICCARDELLI-F18S8G7                     


                                            4 Members                     


                                            5 Guides authored