Difficulty

Easy

Steps

6

Time Required

                          4 minutes

Sections

2

  • Pulp Basket
  • 3 steps
  • Safety Locking Arm
  • 3 steps

Flags

0

  • BackBreville JE98XL Juice Fountain Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Pulp Basket
  • Place the juicer on a flat surface. Make sure the juicer is unplugged and in the “off” position. For the following steps, the pulp basket is on the left.

Place the juicer on a flat surface. Make sure the juicer is unplugged and in the “off” position. For the following steps, the pulp basket is on the left.

1024

Step 2

  • Tilt the juicer slightly to the right so the pulp basket is off of your surface.

Tilt the juicer slightly to the right so the pulp basket is off of your surface.

Step 3

  • Pull the pulp basket down and out from under the juicer cover.

Pull the pulp basket down and out from under the juicer cover.

Step 4

              Safety Locking Arm
  • Place one hand on either side of the safety locking arm.
  • Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.

Place one hand on either side of the safety locking arm.

Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.

Step 5

  • Locate the two 1 inch Phillips #1 screws on the back of the safety arm.

Locate the two 1 inch Phillips #1 screws on the back of the safety arm.

Step 6

  • Remove the safety locking arm by gripping both sides and pulling horizontally away from the juicer.

Remove the safety locking arm by gripping both sides and pulling horizontally away from the juicer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Madison Burgess

Member since: 10/06/2016

499 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 15-1, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 15-1, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S15G1                     


                                            3 Members                     


                                            4 Guides authored