Broken Infill Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

• BROKEN INFILL
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackPROTOCENTRE 999

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              CHECK THE DENSITY OF INFILL               

• Open kissliser
• click on style
• Decrease the infill density to a value of around 20% is normal

Open kissliser

click on style

Decrease the infill density to a value of around 20% is normal

1024

Step 2

              CHECK THE SPEED OF PRINT               

• Go to the machine main menu.
• There you can see the print speed in percentage.
• Reduce the print speed in between a value of 50% to 100%.

Go to the machine main menu.

There you can see the print speed in percentage.

Reduce the print speed in between a value of 50% to 100%.

Step 3

              CHANGE THE INFILL PATTERN               

• Open kisslicer
• Go to style
• change the infill pattern to straight,octagonal, rounded based on the kind of print you are going on with.

Open kisslicer

Go to style

change the infill pattern to straight,octagonal, rounded based on the kind of print you are going on with.

Step 4

              CHECK THE NOZZLE BLOCK               

• In some case , the filament may stick on the nozzle tip and while going for the print, the filament sticked will hit the infill and cause infill to break.
• Remove the sticked filament from the nozzle with the help of a needle tip,

In some case , the filament may stick on the nozzle tip and while going for the print, the filament sticked will hit the infill and cause infill to break.

Remove the sticked filament from the nozzle with the help of a needle tip,

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    abhishek j                     

Member since: 06/27/2017

1,169 Reputation

                                      11 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge