Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
1
- Bobbin
- 7 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackSewing Machine
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Your bobbin may need to be replaced if it has a crack or is damaged in some way because it affects the performance of the machine. It will also cause a loose lower stitch.
In Step 6 of this guide, you will need to use a pair fabric scissors. Fabric scissors tend to be sharper than normal ones and are uniquely designed for sewing. Additionally, make sure to unplug your portable sewing machine before following this guide.
What you need
Step 1
Bobbin
- Make sure that the presser foot (the part that holds fabric in place) is in the raised position before removing the bobbin cover.
- Lift the bobbin cover case found beneath the needle.
Make sure that the presser foot (the part that holds fabric in place) is in the raised position before removing the bobbin cover.
Lift the bobbin cover case found beneath the needle.
1024
Step 2
- Pull the defective bobbin out of the bobbin case and dispose of it properly.
- Empty the thread from the defective bobbin before disposing of it so you can use the excess thread.
Pull the defective bobbin out of the bobbin case and dispose of it properly.
Empty the thread from the defective bobbin before disposing of it so you can use the excess thread.
Step 3
- Take the new bobbin and place it inside the bobbin case.
- Pull at least two inches of thread from the end of the bobbin so you’re able to access it and it doesn’t get tangled.
Take the new bobbin and place it inside the bobbin case.
Pull at least two inches of thread from the end of the bobbin so you’re able to access it and it doesn’t get tangled.
Step 4
- Pull the thread at the end of the bobbin that’s sticking out from the base of the machine.
Pull the thread at the end of the bobbin that’s sticking out from the base of the machine.
Step 5
- Insert the thread carefully to the tension-adjusting spring of the bobbin case.
- The Brother CE8080 has a built-in arrow guide that shows you where to insert the thread.
Insert the thread carefully to the tension-adjusting spring of the bobbin case.
The Brother CE8080 has a built-in arrow guide that shows you where to insert the thread.
Step 6
- Cut off excess thread using fabric scissors.
- Make sure to cut the end of the thread at a slanted angle to prevent thread breakage.
Cut off excess thread using fabric scissors.
Make sure to cut the end of the thread at a slanted angle to prevent thread breakage.
Step 7
- Place the bobbin cover back in its original position on the sewing machine.
- Make sure it “clicks” when placing the bobbin cover back. The click sound ensures that the cover is locked.
Place the bobbin cover back in its original position on the sewing machine.
Make sure it “clicks” when placing the bobbin cover back. The click sound ensures that the cover is locked.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
LOU ERIKA U MUEGA
Member since: 07/03/2022
145 Reputation
1 Guide authored
Badges:
3
Team
York University, Team M-16, Allen Summer 2022
Member of York University, Team M-16, Allen Summer 2022
YORK-ALLEN-SU22SMG16
1 Member
1 Guide authored
Rami Yamout - Aug 10, 2022
Reply
I found your guide straightforward to read and understand, and it is typically adequate. In my opinion, the presence of clear images and the marker you used in the first picture will help and enable readers to repair their sewing machine easily. Well done!
KO SAMUEL TAK SHUN - Sep 17, 2022
Reply
Excellent illustration!!!
