Difficulty
Easy
Steps
2
Time Required
2 - 5 minutes
Sections
1
- Front Panel
- 2 steps
Flags
0
BackBrother mfc-j6945DW
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove screws holding the front panel
- Use a Phillips #2 screwdriver to remove the three 12.1 mm screws holding the control panel in place.
Use a Phillips #2 screwdriver to remove the three 12.1 mm screws holding the control panel in place.
1024
Step 2
Unplug the panel from the rest of the printer
- Lift up the front panel from the device.
- Gently lift up and pull out the data cables that attach the panel to the printer.
Lift up the front panel from the device.
Gently lift up and pull out the data cables that attach the panel to the printer.
To reassemble the front panel, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 7 other contributors
Matt
Member since: 10/30/2014
64 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 4-4, Miles Fall 2014
Member of UMass Dartmouth, Team 4-4, Miles Fall 2014
UMASSD-MILES-F14S4G4
3 Members
5 Guides authored
Raymond Rinaldi - Jan 17, 2018
Reply
Be sure the three plastic tabs on the bottom of the black front cover are inserted fully when you snap the cover back into place or else you will get a message saying the ink door is not closed.
