Difficulty

Easy

Steps

6

Time Required

                          2 minutes

Sections

2

  • Front Panel
  • 2 steps
  • Wireless module
  • 4 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackBrother mfc-j6945DW

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If all else fails, continue with this guide.

What you need

Step 1

              Remove screws holding the front panel
  • Use a Phillips #2 screwdriver to remove the three 12.1 mm screws holding the control panel in place.

Use a Phillips #2 screwdriver to remove the three 12.1 mm screws holding the control panel in place.

1024

Step 2

              Unplug the panel from the rest of the printer
  • Lift up the front panel from the device.
  • Gently lift up and pull out the data cables that attach the panel to the printer.

Lift up the front panel from the device.

Gently lift up and pull out the data cables that attach the panel to the printer.

Step 3

              Remove the screw
  • Unscrew the 14.1mm screw located at the left side of the device.
  • Unscrew the 12.1mm screw to the right of the 14.1mm screw.

Unscrew the 14.1mm screw located at the left side of the device.

Unscrew the 12.1mm screw to the right of the 14.1mm screw.

Step 4

  • Pry open the left front panel away from the printer
  • Be careful. The panel is attached with a data cable.

Pry open the left front panel away from the printer

Be careful. The panel is attached with a data cable.

Step 5

  • Carefully unplug the connector attached to the device.

Carefully unplug the connector attached to the device.

Step 6

              Remove the module from the panel
  • Separate the two clips that hold the module in place.
  • Lift up the module.

Separate the two clips that hold the module in place.

Lift up the module.

To reassemble your wireless module, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Matt

Member since: 10/30/2014

64 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 4-4, Miles Fall 2014                        

                                                  Member of UMass Dartmouth, Team 4-4, Miles Fall 2014 



                    UMASSD-MILES-F14S4G4                     


                                            3 Members                     


                                            5 Guides authored