Difficulty

Moderate

Steps

7

Time Required

                          30 - 40 minutes

Sections

2

  • Keyboard
  • 5 steps
  • Face Plate
  • 2 steps

Flags

0

  • BackBrother PT-1290

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Turn over device to remove batteries.
  • Turn the device to it’s side toward the bottom of the keyboard. Then pop open the case and remove the batteries.

Turn the device to it’s side toward the bottom of the keyboard. Then pop open the case and remove the batteries.

1024

Step 2

              Back of device
  • Remove back of device and set aside.

Remove back of device and set aside.

Step 3

              Remove screws
  • Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable.

Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable.

Step 4

              Remove flat panel
  • Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside.

Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside.

Step 5

              Remove
  • Use a spudger to aid in removing the keyboard.
  • Gently lift out while removing the LCD screen that is connected to the data cable and finishing removing.

Use a spudger to aid in removing the keyboard.

Gently lift out while removing the LCD screen that is connected to the data cable and finishing removing.

Step 6

              Removing the LCD screen.
  • Now that you have removed your keyboard. Turn the device over carefully.
  • Pop of LCD black cover.
  • Use the spudger to gently press out the LCD screen.

Now that you have removed your keyboard. Turn the device over carefully.

Pop of LCD black cover.

Use the spudger to gently press out the LCD screen.

Step 7

              Switching out faceplate.
  • Change out old damaged face plate with your new face plate.

Change out old damaged face plate with your new face plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Lorraine Canez

Member since: 10/25/2014

318 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Gateway, Team 1-4, Johnson Fall 2014                        

                                                  Member of Gateway, Team 1-4, Johnson Fall 2014 



                    GCC-JOHNSON-F14S1G4                     


                                            3 Members                     


                                            6 Guides authored