Difficulty

Moderate

Steps

5

Time Required

                          5 minutes

Sections

1

  • Brother PT-90 Personal Labeler Disassembly
  • 5 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackBrother PT-90 Personal Labeler

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Brother PT-90 Personal Labeler Disassembly
  • Start with your device off. The screen should be blank and not displaying anything.
  • Turn the device over so it’s resting face down.
  • You should be able to see the model name of the label-maker, as well as a window in which you can view the label cartridge.

Start with your device off. The screen should be blank and not displaying anything.

Turn the device over so it’s resting face down.

You should be able to see the model name of the label-maker, as well as a window in which you can view the label cartridge.

1024

Step 2

  • Using your thumb, press in and then upward on the fastener at the top of the device. The back of the device should come off easily.
  • Remove the 4 batteries located on the left side of the device.

Using your thumb, press in and then upward on the fastener at the top of the device. The back of the device should come off easily.

Remove the 4 batteries located on the left side of the device.

Step 3

  • To remove the label cartridge from the device, use a plastic opening tool from your iFixit tool kit.

To remove the label cartridge from the device, use a plastic opening tool from your iFixit tool kit.

Step 4

  • Attach the J1 Screwdriver Bit to the extension tool from your tool kit.
  • Remove all of the screws from the back of the device.

Attach the J1 Screwdriver Bit to the extension tool from your tool kit.

Remove all of the screws from the back of the device.

Step 5

  • Once the screws have been removed, press as shown on the fastener.
  • Carefully open the device.

Once the screws have been removed, press as shown on the fastener.

Carefully open the device.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Tessa Hathaway

Member since: 10/13/2016

127 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Maine, Team 2-1, Diaz Fall 2016                        

                                                  Member of University of Maine, Team 2-1, Diaz Fall 2016 



                    UMAINE-DIAZ-F16S2G1                     


                                            3 Members                     


                                            2 Guides authored