Difficulty

Moderate

Steps

11

Time Required

                          15 minutes

Sections

1

  • Brake Handle
  • 11 steps

Flags

3

Dare To Repair

This guide is a Dare To Repair Contest submission.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBugaboo Cameleon 1 and 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Parts that most often break were 3D-modeled, and the files were used to print new parts with a performance that is acceptable and safe according to Bugaboo requirements.

What you need

Step 1

              Brake Handle
  • Remove both screws on the inner side of the black plastic part, connecting the brake to the frame.
  • Make sure not to lose the screws, since you will need them for the reassembly

Remove both screws on the inner side of the black plastic part, connecting the brake to the frame.

Make sure not to lose the screws, since you will need them for the reassembly

1024

Step 2

  • Remove the left piece that is holding the brake handle.

Remove the left piece that is holding the brake handle.

Step 3

  • Pull the brake line down and take the brake handle out of the black plastic part.

Pull the brake line down and take the brake handle out of the black plastic part.

Step 4

  • Take the brake cable out of the groove in the brake handle.

Take the brake cable out of the groove in the brake handle.

Step 5

  • Pry the inside part out of the brake with a flat screwdriver.
  • Inside the brakes resides a spring. This can cause the part to fly out of the brake handle when the inner part is not clammed anymore.

Pry the inside part out of the brake with a flat screwdriver.

Inside the brakes resides a spring. This can cause the part to fly out of the brake handle when the inner part is not clammed anymore.

Step 6

  • Put the spring into the replacement brake handle.

Put the spring into the replacement brake handle.

Step 7

  • Insert the inner piece of the brake handle into the replacement part. You have to align the small projection on the inner piece with the hole of the brake handle.
  • Use force until the inner piece is clamped into the brake handle.

Insert the inner piece of the brake handle into the replacement part. You have to align the small projection on the inner piece with the hole of the brake handle.

Use force until the inner piece is clamped into the brake handle.

Step 8

  • Insert the brake cable back into the brake handle.
  • The picture shows the brake handle without the inner parts inserted. This is not correct and you should first insert the inner pieces as shown in the previous steps before starting with this step.

Insert the brake cable back into the brake handle.

The picture shows the brake handle without the inner parts inserted. This is not correct and you should first insert the inner pieces as shown in the previous steps before starting with this step.

Step 9

  • Insert the brake handle back into the frame.

Insert the brake handle back into the frame.

Step 10

  • Insert the black inner piece onto the brake handle.
  • Screw the screws back into the frame using the Torx screwdriver.

Insert the black inner piece onto the brake handle.

Screw the screws back into the frame using the Torx screwdriver.

Step 11

  • Enjoy your new brake handle!

Enjoy your new brake handle!

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Attached Documents

  • Brake-Handle.STL
  • STL - 613.66 kb
  • Download

Brake-Handle.STL

STL - 613.66 kb

Author

                                      with 1 other contributor 


                    Rebecca Dowling

Member since: 04/24/2018

620 Reputation

                                      3 Guides authored                  



                       Badges:
                       5





                                                        +2 more badges