Cabin Air Filter Replacement For A Seat Cordoba Ii 2002 2009 2002 2003 2004 2005 2006 2007 2008 2009 Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          45 minutes            

Sections

1

• Cabin Air Filter
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSEAT Car

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Locating the filter               

• The cabin air filter is located in the passenger side footwell

The cabin air filter is located in the passenger side footwell

1024

Step 2

              Removing the cover               

• Remove the cover by loosening the four screws that hold it in place, keeping track of where they go to replace them in the some holes.
• Once that the screws are removed, the cover will come down.

Remove the cover by loosening the four screws that hold it in place, keeping track of where they go to replace them in the some holes.

Once that the screws are removed, the cover will come down.

Step 3

              Removing the filter               

• Now with more room to remove it, slide the two plastic tabs together.
• When the two plastic tabs are in the middle pull the filter cover down.

Now with more room to remove it, slide the two plastic tabs together.

When the two plastic tabs are in the middle pull the filter cover down.

Step 4

              Removing the filter II               

• Remove the filter.
• Once you remove the filter make sure to notice the direction of the air-flow arrows so that you install the new one in the same direction.

Remove the filter.

Once you remove the filter make sure to notice the direction of the air-flow arrows so that you install the new one in the same direction.

Step 5

              Re-assembly               

• To install the new filter follow the previous steps in reverse. If the filter and the plastic cover don’t install fully, it is possible that it is installed backwards.
• When re-installing the cover re-insert the tab and push upwards. Then reinstall the screws.

To install the new filter follow the previous steps in reverse. If the filter and the plastic cover don’t install fully, it is possible that it is installed backwards.

When re-installing the cover re-insert the tab and push upwards. Then reinstall the screws.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             


        WhoDat? is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

WhoDat?

Author

                                      with 1 other contributor 

                    Jonatan M                     

Member since: 03/17/2018

470 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

oscar ibarra - May 22, 2022

Reply

me agremio para conocer formas de reparar yo mismo y economisar el presupuesto mensual