Difficulty
Easy
Steps
3
Time Required
8 minutes
Sections
1
- Calculated Industries 8030 Disassembly
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackCalculated Industries 8030
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing Screws
- Remove 3 Back panel screws + 1 battery cover screw.
- The battery cover screw is larger than the other 3.
Remove 3 Back panel screws + 1 battery cover screw.
The battery cover screw is larger than the other 3.
1024
Step 2
Releasing side clips
- 3 plastic clips on each side must be released. Using the Jimmy and Prying tool spread the back and front appart slightly. Pry the black plastic out away from the white front cover
- Tabs are located roughly beside keys “gal” “Yds” Rcl"
3 plastic clips on each side must be released. Using the Jimmy and Prying tool spread the back and front appart slightly. Pry the black plastic out away from the white front cover
Tabs are located roughly beside keys “gal” “Yds” Rcl"
Step 3
removing circuit board and cleaning
- Remove 10 screws from circuit board
- Lift up circuit board careful to support the LCD.
- Clean the contacts with Isopropyl Alcohol and or repair any broken wires.
Remove 10 screws from circuit board
Lift up circuit board careful to support the LCD.
Clean the contacts with Isopropyl Alcohol and or repair any broken wires.
To reassemble your device, follow these instructions in reverse order. Use caution with power wires, ensure they are inside case and not caught in edge.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Bryan Lord
Member since: 01/15/2021
97 Reputation
1 Guide authored
Badges:
1
