Cambridge Soundworks Oontz Angle Plus Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Lower Casing
1 step
Battery
8 steps

Flags

BackCambridge SoundWorks OontZ Angle Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Lower Casing

Pull back the six screw covers on the bottom of the device.
Starting from the screw covers, peel the casing away from the bottom plate.

Pull back the six screw covers on the bottom of the device.

Starting from the screw covers, peel the casing away from the bottom plate.

1024

Step 2

              Battery

Unscrew the five 11.5mm Phillips screws on the bottom plate.

Unscrew the five 11.5mm Phillips screws on the bottom plate.

Step 3

Carefully pull apart the bottom plate and the top plate, using the blue plastic opening tool.

Carefully pull apart the bottom plate and the top plate, using the blue plastic opening tool.

Step 4

Once the bottom plate and the top plate are separated, slowly pull the back plate away from the top plate.
There are wires connected to both plates so do this step with care.

Once the bottom plate and the top plate are separated, slowly pull the back plate away from the top plate.

There are wires connected to both plates so do this step with care.

Step 5

Unscrew the two 10 mm Phillips screws on the brace holding down the battery.
Remove the brace that holds the battery in place.

Unscrew the two 10 mm Phillips screws on the brace holding down the battery.

Remove the brace that holds the battery in place.

Step 6

Separate the battery from the bottom plate and set the bottom plate aside.

Separate the battery from the bottom plate and set the bottom plate aside.

Step 7

With some force, push the motherboard straight in toward the center of the device.

With some force, push the motherboard straight in toward the center of the device.

Step 8

Pull the motherboard straight out of the device.
There is some adhesive on the motherboard that holds it in place. This make the motherboard fit in the groove rather tight.

Pull the motherboard straight out of the device.

There is some adhesive on the motherboard that holds it in place. This make the motherboard fit in the groove rather tight.

Step 9

Desolder the wires that connect the battery to the motherboard, negative (black wire) and positive (red wire).

Desolder the wires that connect the battery to the motherboard, negative (black wire) and positive (red wire).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 5 other contributors

                    Artem Nykolenko

Member since: 02/10/2016

200 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 1-1, Nance Spring 2016                        

                                                  Member of USF Tampa, Team 1-1, Nance Spring 2016 



                    USFT-NANCE-S16S1G1                     


                                            4 Members                     


                                            6 Guides authored

pokopoko - Dec 2, 2017

Nice, thank you. I have to find the new battery. Any suggestions for suppliers?

Tobhiyah Monroe - May 23, 2018

Where do you get a replacement battery & what kind is it exactly please?

Frank Brauer - Oct 28, 2018

Of course the “guide” wouldn’t give the pertinent information (detailed replacement battery size) needed to actually complete the task at hand….

Dewar Grady - Apr 21, 2020

Introduction#

What you need#

Team#

Introduction

What you need

Team