Cambridge Soundworks Oontz Angle Plus Speaker Grill Replacement Repair Guide

Difficulty

Easy

Steps

10

Time Required

Suggest a time??

Sections

2

• Rubber Casing
• 4 steps
• Speaker Grill
• 6 steps

Flags

0

• BackCambridge SoundWorks OontZ Angle Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rubber Casing               

• Remove the six screw covers from the bottom of the device.

Remove the six screw covers from the bottom of the device.

1024

Step 2

• Starting from the screw covers, remove the front and back casing of the device.

Starting from the screw covers, remove the front and back casing of the device.

Step 3

• Carefully pull off the casing covering the ends.

Carefully pull off the casing covering the ends.

Step 4

• Slowly remove the casing from the top of the device.

Slowly remove the casing from the top of the device.

Step 5

              Speaker Grill               

• Unscrew the five 11.5mm Phillips screws from the bottom plate.

Unscrew the five 11.5mm Phillips screws from the bottom plate.

Step 6

• Carefully pull apart the bottom and top plates, using the blue plastic opening tool.

Carefully pull apart the bottom and top plates, using the blue plastic opening tool.

Step 7

• Once the plates are separated, slowly pull the bottom plate away from the top plate.
• There are wires connected to both plates, so be cautious while doing this step.

Once the plates are separated, slowly pull the bottom plate away from the top plate.

There are wires connected to both plates, so be cautious while doing this step.

Step 8

• Use the metal spudger to bend the three bendable clamps on the ends of the speaker cover.
• Beware, the bending process requires patience and extra time.

Use the metal spudger to bend the three bendable clamps on the ends of the speaker cover.

Beware, the bending process requires patience and extra time.

Step 9

• Next, use the metal spudger to bend the four bendable clamps on the bottom of the speaker cover.
• This step also requires some time and patience.

Next, use the metal spudger to bend the four bendable clamps on the bottom of the speaker cover.

This step also requires some time and patience.

Step 10

• Finally, bend the speaker cover upward and it will slide out.

Finally, bend the speaker cover upward and it will slide out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Farshad Mohebban                     

Member since: 02/10/2016

524 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 1-1, Nance Spring 2016                        

                                                  Member of USF Tampa, Team 1-1, Nance Spring 2016 



                    USFT-NANCE-S16S1G1                     


                                            4 Members                     


                                            6 Guides authored