Difficulty
Easy
Steps
6
Time Required
20 - 30 minutes
Sections
2
- Shroud
- 4 steps
- Check Valve
- 2 steps
Flags
0
BackCampbell Hausfeld FP204800
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Shroud Screws
- Unscrew the four 1cm long shroud screws using a 6mm Allen Wrench.
Unscrew the four 1cm long shroud screws using a 6mm Allen Wrench.
1024
Step 2
Remove Shroud
- Remove the plastic shroud from the compressor.
- Do not pull the shroud too far from the compressor. You could damage the on/off switch wiring.
Remove the plastic shroud from the compressor.
Do not pull the shroud too far from the compressor. You could damage the on/off switch wiring.
Step 3
Remove The Wiring From the Pressure Switch to the On/Off Switch
- Gently pull the wire attached from the pressure switch to the on/off switch.
- It should come off the pressure switch with ease.
- Make sure you are pulling the correct wire. The pressure switch could be in a different configuration on your compressor than in the picture.
Gently pull the wire attached from the pressure switch to the on/off switch.
It should come off the pressure switch with ease.
Make sure you are pulling the correct wire. The pressure switch could be in a different configuration on your compressor than in the picture.
Step 4
Remove the On/Off Switch Wiring
- Gently pull the wire connected from the on/off switch to the motor of the compressor.
- It should be the only wire keeping the shroud from being lifted from the compressor.
Gently pull the wire connected from the on/off switch to the motor of the compressor.
It should be the only wire keeping the shroud from being lifted from the compressor.
Step 5
Unscrew Exhaust Tube
- Unscrew the exhaust tube from the check valve using a Smart Wrench.
Unscrew the exhaust tube from the check valve using a Smart Wrench.
Step 6
Unscrew Check Valve
- Unscrew the check valve by twisting it counter-clockwise using a Smart Wrench.
Unscrew the check valve by twisting it counter-clockwise using a Smart Wrench.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Caleb Davies
Member since: 10/07/2014
528 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 14-29, Maness Fall 2014
Member of Cal Poly, Team 14-29, Maness Fall 2014
CPSU-MANESS-F14S14G29
4 Members
7 Guides authored
Rodney A. Olsen - Mar 15, 2017
Reply
I never thought that it will be that much easy. I was looking for this kind of guide and thanks to ifixit and author of this guide I have successfully did the check valve replacement. Thanks for sharing this.
