Difficulty
Easy
Steps
7
Time Required
5 - 7 minutes
Sections
1
- Bulb
- 7 steps
Flags
0
BackCanon LV-7210
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bulb
- Unscrew the 9mm Phillips #0 screw and remove the panel.
Unscrew the 9mm Phillips #0 screw and remove the panel.
1024
Step 2
- Unscrew the two 7mm Phillips #0 screws that attach the bulb to the mainframe of the projector.
Unscrew the two 7mm Phillips #0 screws that attach the bulb to the mainframe of the projector.
Step 3
- Remove the bulb housing by gently pulling on the small silver handle located on top of the bulb housing.
Remove the bulb housing by gently pulling on the small silver handle located on top of the bulb housing.
Step 4
- You may replace the entire housing unit or replace the bulb itself once you remove it from the housing unit.
You may replace the entire housing unit or replace the bulb itself once you remove it from the housing unit.
Step 5
- Unscrew the 9mm Phillips #0 screw.
Unscrew the 9mm Phillips #0 screw.
Step 6
- Pull the wire tubing out of the plastic holder.
Pull the wire tubing out of the plastic holder.
Step 7
- Pull the bulb out of the casing.
Pull the bulb out of the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
William Christian
Member since: 10/05/2016
331 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 9-3, Lacy Fall 2016
Member of USF Tampa, Team 9-3, Lacy Fall 2016
USFT-LACY-F16S9G3
4 Members
3 Guides authored
