Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- SLR Lens Mount
- 5 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackCanon AE-1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SLR Lens Mount
- Remove the first set of two screws from the lens outer casing using a Phillips #00 screwdriver.
- The first set of screws is located on the front and bottom of the lens casing.
Remove the first set of two screws from the lens outer casing using a Phillips #00 screwdriver.
The first set of screws is located on the front and bottom of the lens casing.
1024
Step 2
- Remove the remaining two screws from the right and left sides of the lens outer casing using a Phillips #00 screwdriver.
Remove the remaining two screws from the right and left sides of the lens outer casing using a Phillips #00 screwdriver.
Step 3
- Remove the lens casing by pulling it away from the body of the camera.
Remove the lens casing by pulling it away from the body of the camera.
Step 4
- Remove the four #00 screws from the SLR lens mount using a Phillips #00 screwdriver.
Remove the four #00 screws from the SLR lens mount using a Phillips #00 screwdriver.
Step 5
- Pull the SLR lens mount away from the body of the camera.
- Be aware that a pin will fall out when the SLR lens mount is removed.
Pull the SLR lens mount away from the body of the camera.
Be aware that a pin will fall out when the SLR lens mount is removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 9 other contributors
Joe Blumberg
Member since: 10/04/2011
213 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
UW Stout, Team 5-1, Zhou Fall 2011
Member of UW Stout, Team 5-1, Zhou Fall 2011
UWSTOUT-ZHOU-F11S5G1
3 Members
8 Guides authored