Difficulty

Easy

Steps

17

Time Required

                          25 minutes

Sections

6

  • Front Panel
  • 4 steps
  • Bottom Panel
  • 2 steps
  • Side Panel With Remote Control Socket
  • 3 steps
  • Top Panel
  • 4 steps
  • Grip
  • 2 steps
  • Battery Door
  • 2 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackCanon EOS 30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Remove the two 4.8 mm black screws above the lens on the front of the camera.

1024

Step 2

  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Step 3

  • Remove the 4.8 mm black screw on the left side of the camera.

Remove the 4.8 mm black screw on the left side of the camera.

Step 4

  • Remove the front panel by lifting it away from the camera’s body.

Remove the front panel by lifting it away from the camera’s body.

Step 5

              Bottom Panel
  • Remove seven 4.25 mm black screws on the bottom panel.

Remove seven 4.25 mm black screws on the bottom panel.

Step 6

  • Remove the bottom panel.

Remove the bottom panel.

Step 7

              Side Panel With Remote Control Socket
  • Remove two 6.5 mm black screws from the panel.

Remove two 6.5 mm black screws from the panel.

Step 8

  • Remove the plastic remote control socket cap by pulling it straight out.

Remove the plastic remote control socket cap by pulling it straight out.

Step 9

  • Slide panel toward bottom of camera to remove.

Slide panel toward bottom of camera to remove.

Step 10

              Top Panel
  • Slide the outer eyepiece upward to remove it.

Slide the outer eyepiece upward to remove it.

Step 11

  • Remove the two 4.75 mm black screws located on the top of the camera.

Remove the two 4.75 mm black screws located on the top of the camera.

Step 12

  • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Step 13

  • Slowly separate the top panel from the camera by pushing it upward.
  • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Slowly separate the top panel from the camera by pushing it upward.

Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Step 14

              Grip
  • Remove the two 5.5 mm screws from front of camera.

Remove the two 5.5 mm screws from front of camera.

Step 15

  • Remove grip panel.

Remove grip panel.

Step 16

              Battery Door
  • Remove one black screw from battery door on underside of grip.

Remove one black screw from battery door on underside of grip.

Step 17

  • Remove battery door.

Remove battery door.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Jackie

Member since: 04/17/2011

236 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 8-8, Regan Spring 2011                        

                                                  Member of Cal Poly, Team 8-8, Regan Spring 2011 



                    CPSU-REGAN-S11S8G8                     


                                            5 Members                     


                                            22 Guides authored

Alan - Jul 14, 2011

Reply

I was able to complete this by going from step 9 to 15. Oddly, I only had one screw to remove in step 15 but the grip piece easily slid out without needing to remove the top of the camera.