Canon Eos 30 Grip Replacement Repair Guide

Difficulty

Moderate

Steps

13

Time Required

                          25 minutes            

Sections

4

• Front Panel
• 4 steps
• Top Panel
• 4 steps
• Side Panel With Remote Control Socket
• 3 steps
• Grip
• 2 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

• BackCanon EOS 30

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Remove the two 4.8 mm black screws above the lens on the front of the camera.

Remove the two 4.8 mm black screws above the lens on the front of the camera.

1024

Step 2

• Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Step 3

• Remove the 4.8 mm black screw on the left side of the camera.

Remove the 4.8 mm black screw on the left side of the camera.

Step 4

• Remove the front panel by lifting it away from the camera’s body.

Remove the front panel by lifting it away from the camera’s body.

Step 5

              Top Panel               

• Slide the outer eyepiece upward to remove it.

Slide the outer eyepiece upward to remove it.

Step 6

• Remove the two 4.75 mm black screws located on the top of the camera.

Remove the two 4.75 mm black screws located on the top of the camera.

Step 7

• Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Step 8

• Slowly separate the top panel from the camera by pushing it upward.
• Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Slowly separate the top panel from the camera by pushing it upward.

Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Step 9

              Side Panel With Remote Control Socket               

• Remove two 6.5 mm black screws from the panel.

Remove two 6.5 mm black screws from the panel.

Step 10

• Remove the plastic remote control socket cap by pulling it straight out.

Remove the plastic remote control socket cap by pulling it straight out.

Step 11

• Slide panel toward bottom of camera to remove.

Slide panel toward bottom of camera to remove.

Step 12

              Grip               

• Remove the two 5.5 mm screws from front of camera.

Remove the two 5.5 mm screws from front of camera.

Step 13

• Remove grip panel.

Remove grip panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 

                    Jackie                     

Member since: 04/17/2011

236 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 8-8, Regan Spring 2011                        

                                                  Member of Cal Poly, Team 8-8, Regan Spring 2011 



                    CPSU-REGAN-S11S8G8                     


                                            5 Members                     


                                            22 Guides authored                     

Sino Lino - Mar 31, 2020

Reply

Didn’t you forget the step to remove the bottom plate?