Canon Eos 30 Remote Control Socket Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          25 minutes            

Sections

4

• Front Panel
• 4 steps
• Bottom Panel
• 2 steps
• Side Panel With Remote Control Socket
• 3 steps
• Remote Control Socket
• 2 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

• BackCanon EOS 30

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Remove the two 4.8 mm black screws above the lens on the front of the camera.

Remove the two 4.8 mm black screws above the lens on the front of the camera.

1024

Step 2

• Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Step 3

• Remove the 4.8 mm black screw on the left side of the camera.

Remove the 4.8 mm black screw on the left side of the camera.

Step 4

• Remove the front panel by lifting it away from the camera’s body.

Remove the front panel by lifting it away from the camera’s body.

Step 5

              Bottom Panel               

• Remove seven 4.25 mm black screws on the bottom panel.

Remove seven 4.25 mm black screws on the bottom panel.

Step 6

• Remove the bottom panel.

Remove the bottom panel.

Step 7

              Side Panel With Remote Control Socket               

• Remove two 6.5 mm black screws from the panel.

Remove two 6.5 mm black screws from the panel.

Step 8

• Remove the plastic remote control socket cap by pulling it straight out.

Remove the plastic remote control socket cap by pulling it straight out.

Step 9

• Slide panel toward bottom of camera to remove.

Slide panel toward bottom of camera to remove.

Step 10

              Remote Control Socket               

• Remove one 4.8 mm silver screw securing Remote Control Socket to camera.

Remove one 4.8 mm silver screw securing Remote Control Socket to camera.

Step 11

• Remote Control Socket is now secured by 3 wires.
• Desolder connections to replace Remote Control Socket.

Remote Control Socket is now secured by 3 wires.

Desolder connections to replace Remote Control Socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Antonia                     

Member since: 04/17/2011

124 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 8-8, Regan Spring 2011                        

                                                  Member of Cal Poly, Team 8-8, Regan Spring 2011 



                    CPSU-REGAN-S11S8G8                     


                                            5 Members                     


                                            22 Guides authored