Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

4

  • Batteries
  • 2 steps
  • Side Panel with Lever
  • 3 steps
  • Front Panel
  • 3 steps
  • Back Lock-Release Lever
  • 1 step

Flags

0

  • BackCanon EOS 300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Open up the battery door.

Open up the battery door.

1024

Step 2

  • Remove the batteries from the camera by sliding them out into your palm.

Remove the batteries from the camera by sliding them out into your palm.

Step 3

              Side Panel with Lever
  • Release the side latch to open the back panel.

Release the side latch to open the back panel.

Step 4

  • Remove the two black 4.5mm screws above and below the latch.

Remove the two black 4.5mm screws above and below the latch.

Step 5

  • Using your finger, carefully pry open the side panel from the top of camera.
  • Pull panel downwards to remove.
  • Make sure to keep track of the small black piece of rubber under the latch.

Using your finger, carefully pry open the side panel from the top of camera.

Pull panel downwards to remove.

Make sure to keep track of the small black piece of rubber under the latch.

Step 6

              Front Panel
  • Remove the two silver 6mm Phillips #1 screws.

Remove the two silver 6mm Phillips #1 screws.

Step 7

  • Flip camera over to the bottom.
  • Remove the one 5mm Phillips #1 silver screw.

Flip camera over to the bottom.

Remove the one 5mm Phillips #1 silver screw.

Step 8

  • Remove the front panel by pulling away from the side with the lever.

Remove the front panel by pulling away from the side with the lever.

Step 9

              Back Lock-Release Lever
  • Pull off the lever by pushing up from the bottom and pulling away from the bottom.

Pull off the lever by pushing up from the bottom and pulling away from the bottom.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jordan Tang

Member since: 01/24/2014

572 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 6-20, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 6-20, Maness Winter 2014 



                    CPSU-MANESS-W14S6G20                     


                                            4 Members                     


                                            21 Guides authored