Difficulty
Very easy
Steps
2
Time Required
5 minutes
Sections
1
- Eye piece and Battery door
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackCanon EOS 60D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Eye piece and Battery door
- Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.
- Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.
Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.
Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.
1024
Step 2
- Open the battery door
- Rotate the door so the one side of the hinge pops out (see photo #2)
- Slide other pin out (it pops out the same, but this is easier)
Open the battery door
Rotate the door so the one side of the hinge pops out (see photo #2)
Slide other pin out (it pops out the same, but this is easier)
To reassemble your device, follow these instructions in reverse order.
Rubber grips will require adhesive. (I havent gotten this far, I assume rubber cement / double stick tape may work)
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 1 other contributor
Eric D
Member since: 11/13/2012
1,233 Reputation
5 Guides authored
Badges:
15
+12 more badges
Wendell C Durnil - Mar 6, 2017
Reply
But how do you REPLACE the rubber eye piece? Mine seems to be NOT glued, but in a tract of sorts.