Difficulty

Easy

Steps

10

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 3 steps
  • Front Cover
  • 7 steps

Flags

0

  • BackCanon EOS A2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.

Locate the battery door/camera grip on the left side of the camera and lift the rotating removal tab.

1024

Step 2

  • Twist the tab clockwise to unlock the door, then pull outward from the camera to remove it.

Twist the tab clockwise to unlock the door, then pull outward from the camera to remove it.

Step 3

  • Remove the battery from inside the battery housing and set the cover aside.

Remove the battery from inside the battery housing and set the cover aside.

Step 4

              Front Cover
  • Remove the two 6.4mm screws above the lens aperture using a phillips #00 screw driver.

Remove the two 6.4mm screws above the lens aperture using a phillips #00 screw driver.

Step 5

  • Remove the 6.4mm screw from the inside of the flash bezel.
  • If the flash is locked down, insert the battery, then with the help of a pencil turn the rotary (CW or CCW) switch until the “125” is displayed in the LCD. Press the Flash symbol button. You should hear the latch from the flash, then you can manually lift the flash. If OK, then remove the battery from the camera

Remove the 6.4mm screw from the inside of the flash bezel.

If the flash is locked down, insert the battery, then with the help of a pencil turn the rotary (CW or CCW) switch until the “125” is displayed in the LCD. Press the Flash symbol button. You should hear the latch from the flash, then you can manually lift the flash. If OK, then remove the battery from the camera

Step 6

  • Flip the camera upside down and remove the 5.4mm screw below the lens bezel on the front of the camera.

Flip the camera upside down and remove the 5.4mm screw below the lens bezel on the front of the camera.

Step 7

  • Remove the 5.6mm screws behind the battery cover.

Remove the 5.6mm screws behind the battery cover.

Step 8

  • Remove two 6.4mm screws on the latch mechanism on the right side of the camera.

Remove two 6.4mm screws on the latch mechanism on the right side of the camera.

Step 9

  • Remove the 6.4mm screw on the top of the inside edge of the battery hole.

Remove the 6.4mm screw on the top of the inside edge of the battery hole.

Step 10

  • Starting at the flash, carefully pull the front cover away from the camera.

Starting at the flash, carefully pull the front cover away from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Mark

Member since: 04/20/2011

157 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 8-9, Regan Spring 2011                        

                                                  Member of Cal Poly, Team 8-9, Regan Spring 2011 



                    CPSU-REGAN-S11S8G9                     


                                            4 Members                     


                                            12 Guides authored