Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Front Casing
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackCanon EOS 300D

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the front screws
  • Remove the two 7mm philips screws from the front casing.

Remove the two 7mm philips screws from the front casing.

1024

Step 2

              Remove bottom screws
  • Remove the three 1/8" philips screws from the bottom.
  • Remove the single 3/16" philips screw from the bottom.

Remove the three 1/8" philips screws from the bottom.

Remove the single 3/16" philips screw from the bottom.

Step 3

              Remove the right side screws
  • Remove the two 1/8" philip screws from the right side of the front casing.

Remove the two 1/8" philip screws from the right side of the front casing.

Step 4

              Remove battery door
  • Locate the lock of the battery door and pull it for allowing the door to be removed.
  • Remove the battery door.

Locate the lock of the battery door and pull it for allowing the door to be removed.

Remove the battery door.

Step 5

              Remove the battery door hinge mount
  • Remove the two 1/8" philips screws from the hinge mount.
  • Take out the door hinge mount.

Remove the two 1/8" philips screws from the hinge mount.

Take out the door hinge mount.

Step 6

              Remove internal screws
  • Remove the screw holding the black cap which covers access holes to the screws holding the front casing to the battery compartment.
  • Remove the black cap pulling it to the right.
  • Remove the two 3/16" philips screws.

Remove the screw holding the black cap which covers access holes to the screws holding the front casing to the battery compartment.

Remove the black cap pulling it to the right.

Remove the two 3/16" philips screws.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Claudio Felix

Member since: 01/01/2016

782 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges