Canon Eos Rebel G Back Panel Latch Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes            

Sections

2

• Front Panel
• 3 steps
• Back Panel Latch
• 3 steps

Flags

0

• BackCanon EOS Rebel G

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

1024

Step 2

• Using your finger, peel back the textured grip so the components are separated.

Using your finger, peel back the textured grip so the components are separated.

Step 3

• Using the flat end of a spudger, loosen the connection between the front panel and the device.
• Remove the front panel using your hands.

Using the flat end of a spudger, loosen the connection between the front panel and the device.

Remove the front panel using your hands.

Step 4

              Back Panel Latch               

• Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.
• Two 4.3 mm Phillips screws

Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.

Two 4.3 mm Phillips screws

Step 5

• Open the back panel by pushing the locking latch up.
• Lift the latch cover off of the camera body.

Open the back panel by pushing the locking latch up.

Lift the latch cover off of the camera body.

Step 6

• Slide the side latch (for the back door) up and then lift straight away from the camera body.
• Sometimes the latch will detach while pushing it up.

Slide the side latch (for the back door) up and then lift straight away from the camera body.

Sometimes the latch will detach while pushing it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Zach                     

Member since: 04/04/2012

43 Reputation

                                      8 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 14-9, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 14-9, Forte Spring 2012 



                    CPSU-FORTE-S12S14G9                     


                                            5 Members                     


                                            24 Guides authored