Difficulty

Difficult

Steps

9

Time Required

                          15 - 30 minutes

Sections

2

  • Front Panel
  • 3 steps
  • Flash
  • 6 steps

Flags

0

  • BackCanon EOS Rebel G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

1024

Step 2

  • Using your finger, peel back the textured grip so the components are separated.

Using your finger, peel back the textured grip so the components are separated.

Step 3

  • Using the flat end of a spudger, loosen the connection between the front panel and the device.
  • Remove the front panel using your hands.

Using the flat end of a spudger, loosen the connection between the front panel and the device.

Remove the front panel using your hands.

Step 4

              Flash
  • Pop the flash up with your thumb

Pop the flash up with your thumb

Step 5

  • Unscrew the two screws on the front of the flash near the bulb cover.

Unscrew the two screws on the front of the flash near the bulb cover.

Step 6

  • Close the flash.
  • Lift the flash cover off.

Close the flash.

Lift the flash cover off.

Step 7

  • Pull off yellow capacitor from flash wiring.

Pull off yellow capacitor from flash wiring.

Step 8

  • Remove white cocking with a razor blade, and then unsolder connection.

Remove white cocking with a razor blade, and then unsolder connection.

Step 9

  • Remove the flash cover to access the flash bulb.
  • After wires are unsoldered, slide flash bulb out from housing.

Remove the flash cover to access the flash bulb.

After wires are unsoldered, slide flash bulb out from housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Zach

Member since: 04/04/2012

43 Reputation

                                      8 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 14-9, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 14-9, Forte Spring 2012 



                    CPSU-FORTE-S12S14G9                     


                                            5 Members                     


                                            24 Guides authored