Canon Eos Rebel G Lens Connector Replacement Repair Guide

Featured

Featured Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Front Panel
• 3 steps
• Lens Connector
• 4 steps

Flags

1

Featured Guide

This guide has been found to be exceptionally cool by the iFixit staff.

• BackCanon EOS Rebel G

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

1024

Step 2

• Using your finger, peel back the textured grip so the components are separated.

Using your finger, peel back the textured grip so the components are separated.

Step 3

• Using the flat end of a spudger, loosen the connection between the front panel and the device.
• Remove the front panel using your hands.

Using the flat end of a spudger, loosen the connection between the front panel and the device.

Remove the front panel using your hands.

Step 4

              Lens Connector               

• Using a Phillips #00 screwdriver, remove the 5 indicated screws
• Five 6.2 mm Phillips screws

Using a Phillips #00 screwdriver, remove the 5 indicated screws

Five 6.2 mm Phillips screws

Step 5

• Using your hands, remove the top black ring.
• WARNING! The indicated piece is spring loaded. Prepare for it to eject when taking off top ring.
• Spring located here.

Using your hands, remove the top black ring.

WARNING! The indicated piece is spring loaded. Prepare for it to eject when taking off top ring.

Spring located here.

Step 6

• There are two silver metal rings.
• Remove the top silver metal ring.

There are two silver metal rings.

Remove the top silver metal ring.

Step 7

• Remove the bottom silver ring.

Remove the bottom silver ring.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    Zach                     

Member since: 04/04/2012

43 Reputation

                                      8 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 14-9, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 14-9, Forte Spring 2012 



                    CPSU-FORTE-S12S14G9                     


                                            5 Members                     


                                            24 Guides authored