Canon Eos Rebel T1I Camera Battery Notch Replacement Repair Guide

Difficulty

Difficult

Steps

7

Time Required

                          20 - 30 minutes            

Sections

1

• Battery Notch
• 7 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackCanon EOS Rebel T1i / 500D

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery Notch               

• Locate the side of camera with the HDMI port.
• Unscrew the 7mm with a #00 Phillips screw driver.

Locate the side of camera with the HDMI port.

Unscrew the 7mm with a #00 Phillips screw driver.

1024

Step 2

• Use your fingers to gently detach the plastic component from the camera

Use your fingers to gently detach the plastic component from the camera

Step 3

• Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver.

Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver.

Step 4

• Unscrew the inner 4mm screw with a #00 Phillips screwdriver.

Unscrew the inner 4mm screw with a #00 Phillips screwdriver.

Step 5

• Unscrew the top 7mm screw on the right side of the camera.
• Unscrew the bottom 4 mm screw on the right side of the camera.

Unscrew the top 7mm screw on the right side of the camera.

Unscrew the bottom 4 mm screw on the right side of the camera.

Step 6

• Use the plastic opening tool to pry open the entire back panel.
• Use your fingers to pull off the back panel.

Use the plastic opening tool to pry open the entire back panel.

Use your fingers to pull off the back panel.

Step 7

• Now that the panel is off, unscrew the 9mm screw holding the battery notch in.
• Use the pliers (or your fingers) to take off the white notch.
• There is a spring underneath the battery notch. Do not lose this spring or let it fall off.

Now that the panel is off, unscrew the 9mm screw holding the battery notch in.

Use the pliers (or your fingers) to take off the white notch.

There is a spring underneath the battery notch. Do not lose this spring or let it fall off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Jonathan Lin                     

Member since: 04/14/2014

536 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 3-41, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 3-41, Maness Spring 2014 



                    CPSU-MANESS-S14S3G41                     


                                            4 Members                     


                                            10 Guides authored