Canon Eos Rebel T1I Front Screen Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 minutes            

Sections

1

• Front Screen
• 3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackCanon EOS Rebel T1i / 500D

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Screen               

• Clean the broken or cracked screen as best as possible.
• Place the suction cup on the damaged screen.

Clean the broken or cracked screen as best as possible.

Place the suction cup on the damaged screen.

1024

Step 2

• While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

Step 3

• Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.
• Remove the plastic screen from the camera.
• Release the broken screen by pulling down the lever of the suction cup.

Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

Remove the plastic screen from the camera.

Release the broken screen by pulling down the lever of the suction cup.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    Michael Peck                     

Member since: 04/14/2014

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 3-41, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 3-41, Maness Spring 2014 



                    CPSU-MANESS-S14S3G41                     


                                            4 Members                     


                                            10 Guides authored                     

cmorris - Sep 5, 2015

Reply

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.