Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
2
- Battery
- 3 steps
- Screen
- 4 steps
Flags
0
BackCanon EOS Rebel T3i / 600D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the battery compartment on the bottom of the camera.
Locate the battery compartment on the bottom of the camera.
1024
Step 2
- Hook your finger onto the compartment door latch.
- Open the battery compartment door.
Hook your finger onto the compartment door latch.
Open the battery compartment door.
Step 3
- Remove the battery from the compartment.
Remove the battery from the compartment.
Step 4
Screen
- Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.
Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.
Step 5
- Remove the plastic backing.
Remove the plastic backing.
Step 6
- Unplug the blue cable from the back of the LCD.
Unplug the blue cable from the back of the LCD.
Step 7
- Remove the two 3 mm Phillips #000 screws.
- Separate the LCD from the plastic housing.
Remove the two 3 mm Phillips #000 screws.
Separate the LCD from the plastic housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 3 other contributors
Natalie Crock
Member since: 08/27/2015
752 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 5-2, Blackwell Fall 2015
Member of USF Tampa, Team 5-2, Blackwell Fall 2015
USFT-BLACKWELL-F15S5G2
4 Members
10 Guides authored