Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
2
- Battery
- 2 steps
- LCD
- 3 steps
Flags
0
BackCanon EOS Rebel T4i / 650D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the battery cover at the bottom of the camera.
- Pull down on the black tab to open the cover.
Locate the battery cover at the bottom of the camera.
Pull down on the black tab to open the cover.
1024
Step 2
- Push the grey tab on the right side of the battery.
- Remove the battery from the slot.
Push the grey tab on the right side of the battery.
Remove the battery from the slot.
Step 3
LCD
- Remove the six screws on the housing of the LCD.
- Four 3.1mm Phillips screws on the side with the hinge.
- Two 2.7mm Phillips screws
Remove the six screws on the housing of the LCD.
Four 3.1mm Phillips screws on the side with the hinge.
Two 2.7mm Phillips screws
Step 4
- Remove the plastic back of the LCD.
Remove the plastic back of the LCD.
Step 5
- Unplug the blue cable attached to the back of the LCD.
Unplug the blue cable attached to the back of the LCD.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Jordan Rabold
Member since: 04/14/2014
759 Reputation
3 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team 12-33, Maness Spring 2014
Member of Cal Poly, Team 12-33, Maness Spring 2014
CPSU-MANESS-S14S12G33
4 Members
13 Guides authored
rdmahony4 - Apr 11, 2022
Reply
where can I buy a replacement LCD screen for my EOS650D camera in Adelaide. Australia
