Difficulty

Moderate

Steps

13

Time Required

                          2 - 10 minutes

Sections

2

  • Bottom Cover
  • 3 steps
  • Bottom Cover and More
  • 10 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackCanon EOS Rebel XS 35mm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover
  • Remove 6 screws using a PH000 Screwdriver.
  • Remove 1 (7mm) screw
  • Remove 5 (4mm) screws

Remove 6 screws using a PH000 Screwdriver.

Remove 1 (7mm) screw

Remove 5 (4mm) screws

1024

Step 2

  • With your fingers, push on the bottom cover with a horizontal force until it clicks and separates.

With your fingers, push on the bottom cover with a horizontal force until it clicks and separates.

Step 3

  • With tweezers - although you can also use your fingers - you may remove these 5 gears (shown with colored squares around them) and place them somewhere else for the time being. They fall out easily while you’re working, so this will help you stay organized.

With tweezers - although you can also use your fingers - you may remove these 5 gears (shown with colored squares around them) and place them somewhere else for the time being. They fall out easily while you’re working, so this will help you stay organized.

Step 4

              Bottom Cover and More
  • Remove the 5mm silver Phillips #000 screw.
  • Remove three 4mm Phillips #000 screws.

Remove the 5mm silver Phillips #000 screw.

Remove three 4mm Phillips #000 screws.

Step 5

  • Remove the silver plate with tweezers or fingers.

Remove the silver plate with tweezers or fingers.

Step 6

  • Be mindful of the spring attached to the plastic piece. Do not lose it.
  • Remove the plastic black part.

Be mindful of the spring attached to the plastic piece. Do not lose it.

Remove the plastic black part.

Step 7

  • Remove the black gear with tweezers or fingers.

Remove the black gear with tweezers or fingers.

Step 8

  • Remove the gear with tweezers or fingers.

Remove the gear with tweezers or fingers.

Step 9

  • Remove the part indicated in the picture with tweezers or fingers.

Remove the part indicated in the picture with tweezers or fingers.

Step 10

Step 11

Step 12

  • Remove two 3mm Phillips #000 screws.
  • Remove two silver 3.5mm Phillips #000 screws.

Remove two 3mm Phillips #000 screws.

Remove two silver 3.5mm Phillips #000 screws.

Step 13

  • Remove the second silver plate using tweezers or fingers.

Remove the second silver plate using tweezers or fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    christiansvezia

Member since: 10/24/2018

1,102 Reputation

                                      10 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges