Difficulty

Easy

Steps

8

Time Required

                          1 minute

Sections

2

  • Top Cover
  • 4 steps
  • Camera Mode Dial
  • 4 steps

Flags

0

  • BackCanon EOS Rebel XS 35mm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cover
  • Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

1024

Step 2

  • Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

Step 3

  • Pull off the front cover.

Pull off the front cover.

Step 4

  • Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

Step 5

              Camera Mode Dial
  • Locate the camera dial (surrounded by a red square) and turn the top cover of the camera upside down for access to the screw underneath the dial.

Locate the camera dial (surrounded by a red square) and turn the top cover of the camera upside down for access to the screw underneath the dial.

Step 6

  • Using a PH000 screwdriver bit, remove the silver screw circled in the picture, which is 3 mm in length and 1 mm in diameter.

Using a PH000 screwdriver bit, remove the silver screw circled in the picture, which is 3 mm in length and 1 mm in diameter.

Step 7

  • Using tweezers, remove the metal part surrounded by the red square.

Using tweezers, remove the metal part surrounded by the red square.

Step 8

  • Using your fingers, remove the black dial! (The dial is surrounded by a red square in the picture.)

Using your fingers, remove the black dial! (The dial is surrounded by a red square in the picture.)

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    christiansvezia

Member since: 10/24/2018

1,102 Reputation

                                      10 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges