Difficulty

Easy

Steps

2

Time Required

                          1 minute

Sections

1

  • Flash
  • 2 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackCanon EOS Rebel XS 35mm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Flash
  • Pull up on the flash / the camera part housing the flash, as shown in the pictures. If this isn’t working, try these things not shown in the pictures: 1) using a spudger, your nail, or the like to pry it open; or 2) pull it open with your finger and thumb on either side of it.

Pull up on the flash / the camera part housing the flash, as shown in the pictures. If this isn’t working, try these things not shown in the pictures: 1) using a spudger, your nail, or the like to pry it open; or 2) pull it open with your finger and thumb on either side of it.

1024

Step 2

  • Using a PH000 screwdriver bit, remove the two silver screws circled in the picture. Both screws are 5 mm in length and about 1.25 mm in diameter.

Using a PH000 screwdriver bit, remove the two silver screws circled in the picture. Both screws are 5 mm in length and about 1.25 mm in diameter.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    christiansvezia

Member since: 10/24/2018

1,102 Reputation

                                      10 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges