Canon Eos Rebel Xs 35Mm Lcd Screen Replacement Repair Guide

Difficulty

Very easy

Steps

7

Time Required

                          1 - 3 minutes            

Sections

2

• Top Cover
• 4 steps
• LCD screen
• 3 steps

Flags

0

• BackCanon EOS Rebel XS 35mm

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

1024

Step 2

• Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

Step 3

• Pull off the front cover.

Pull off the front cover.

Step 4

• Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

Step 5

              LCD screen               

• Using a PH000 screwdriver bit, remove the tiny silver screw circled in the picture, which is 2 mm in length and 1 mm in diameter.

Using a PH000 screwdriver bit, remove the tiny silver screw circled in the picture, which is 2 mm in length and 1 mm in diameter.

Step 6

• With your fingers or tweezers, remove the brass-colored part.

With your fingers or tweezers, remove the brass-colored part.

Step 7

• With your fingers (probably not tweezers or something similar, so you don’t damage the screen), remove the LCD screen.

With your fingers (probably not tweezers or something similar, so you don’t damage the screen), remove the LCD screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    christiansvezia                     

Member since: 10/24/2018

1,102 Reputation

                                      10 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges