Canon Eos Rebel Xs 35Mm Lens Mount Parts Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          7 - 10 minutes            

Sections

1

• Lens Mount Parts
• 5 steps

Flags

0

• BackCanon EOS Rebel XS 35mm

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lens Mount Parts               

• Using a PH000 screwdriver bit, remove the 2 black screws circled in the picture, which are both 6 mm in length and 1.25 mm in diameter.

Using a PH000 screwdriver bit, remove the 2 black screws circled in the picture, which are both 6 mm in length and 1.25 mm in diameter.

1024

Step 2

• Using a PH000 screwdriver bit, remove the 5 black screws circled in the picture, which are all 5.5 mm in length and 2 mm in diameter.

Using a PH000 screwdriver bit, remove the 5 black screws circled in the picture, which are all 5.5 mm in length and 2 mm in diameter.

Step 3

• Simply using your fingers - although you can use something else such as tweezers - remove the first layer of the lens mount. This first layer is black, plastic, has a red dot at the top, and so on.

Simply using your fingers - although you can use something else such as tweezers - remove the first layer of the lens mount. This first layer is black, plastic, has a red dot at the top, and so on.

Step 4

• Using (preferably) tweezers - although you can also use your fingers - remove the flimsy brass-colored layer of the lens mount.

Using (preferably) tweezers - although you can also use your fingers - remove the flimsy brass-colored layer of the lens mount.

Step 5

• Using (preferably) tweezers - although you can also use your fingers - remove the silver layer of the lens mount.

Using (preferably) tweezers - although you can also use your fingers - remove the silver layer of the lens mount.

To reassemble your device, follow these instructions in reverse order.

Reassembly can be a lot harder than disassembly for this part of the camera, which accounts for the large range in estimated time.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    christiansvezia                     

Member since: 10/24/2018

1,102 Reputation

                                      10 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges