Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Latch Side Cover
- 2 steps
Flags
0
BackCanon EOS Rebel XS / 1000D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Latch Side Cover
- Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
1024
Step 2
- On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
- Pry up the panel; starting from the front/bottom corner, as indicated.
- There’s a concealed lip, under the opposite edge.
On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
Pry up the panel; starting from the front/bottom corner, as indicated.
There’s a concealed lip, under the opposite edge.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Daniel Bussone
Member since: 01/28/2011
1,251 Reputation
11 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 3-41, Regan Winter 2011
Member of Cal Poly, Team 3-41, Regan Winter 2011
CPSU-REGAN-W11S3G41
2 Members
21 Guides authored
