Canon Eos Rebel Xs Lcd Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

Suggest a time??

Sections

Latch Side Cover
2 steps
Back Cover
2 steps
LCD
2 steps

Flags

BackCanon EOS Rebel XS / 1000D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Latch Side Cover

Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

1024

Step 2

On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
Pry up the panel; starting from the front/bottom corner, as indicated.
There’s a concealed lip, under the opposite edge.

On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

Pry up the panel; starting from the front/bottom corner, as indicated.

There’s a concealed lip, under the opposite edge.

Step 3

              Back Cover

Remove the three long black screws from the bottom using a #00 Phillips screwdriver.
Use tweezers to lift the panel.

Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

Use tweezers to lift the panel.

Step 4

Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

Step 5

LCD

Use the tweezers to gently remove the straps (in the teal box).
Use the Phillips Screwdriver to remove the four screws (in the red dots).
Use your fingers to remove the silver plate.

Use the tweezers to gently remove the straps (in the teal box).

Use the Phillips Screwdriver to remove the four screws (in the red dots).

Use your fingers to remove the silver plate.

Step 6

Use the Spudger on the edges of the screen.
Once one end is lose, use the tweezers to lift the screen.

Use the Spudger on the edges of the screen.

Once one end is lose, use the tweezers to lift the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors

                    Daniel Bussone

Member since: 01/28/2011

1,251 Reputation

                                      11 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 3-41, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 3-41, Regan Winter 2011 



                    CPSU-REGAN-W11S3G41                     


                                            2 Members                     


                                            21 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team