Difficulty
Moderate
Steps
8
Time Required
10 minutes
Sections
1
- Back Panel
- 8 steps
Flags
0
BackCanon EOS Rebel XSi / 450D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Squeeze the eyepiece between your index finger and thumb and lift up and off.
Squeeze the eyepiece between your index finger and thumb and lift up and off.
1024
Step 2
- Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.
Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.
Step 3
- Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).
Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).
Step 4
- Remove grip by slowly peeling off.
Remove grip by slowly peeling off.
Step 5
- Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.
Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.
Step 6
- Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).
Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).
Step 7
- Remove the side panel by lifting off with fingers.
Remove the side panel by lifting off with fingers.
Step 8
- Use hands to pry off the back panel.
Use hands to pry off the back panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Erik Mork
Member since: 01/27/2017
596 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 22-10, Maness Winter 2017
Member of Cal Poly, Team 22-10, Maness Winter 2017
CPSU-MANESS-W17S22G10
4 Members
10 Guides authored
