Canon Imageclass Mf4350D Transformer Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

3

• Front Paneling
• 3 steps
• Right Side Paneling
• 1 step
• Transformer
• 4 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackCanon ImageCLASS MF4350d

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Paneling               

• Lift the printer lid up as shown in the photo.

Lift the printer lid up as shown in the photo.

1024

Step 2

• Locate and remove the two 10mm side screws. There is one on each side.

Locate and remove the two 10mm side screws. There is one on each side.

Step 3

• Unhook the plastic panel from the printer starting from the top.
• You may need to wiggle the panel a bit to loosen it.
• To remove the bottom part of the paneling gently lay the printer on its back.
• The scanner lid needs to be supported when moving the printer

Unhook the plastic panel from the printer starting from the top.

You may need to wiggle the panel a bit to loosen it.

To remove the bottom part of the paneling gently lay the printer on its back.

The scanner lid needs to be supported when moving the printer

Step 4

              Right Side Paneling               

• Gently unhook the right side paneling (as looking at the printer’s front face) from the printer.
• Use a gentle back and forth motion to wiggle the hooks out.

Gently unhook the right side paneling (as looking at the printer’s front face) from the printer.

Use a gentle back and forth motion to wiggle the hooks out.

Step 5

              Transformer               

• Locate the yellow wire connected to the metal box.
• Carefully pull the yellow wire from the black connector.
• Wires may detach completely from plug so tug very gently.

Locate the yellow wire connected to the metal box.

Carefully pull the yellow wire from the black connector.

Wires may detach completely from plug so tug very gently.

Step 6

• Locate the spring.
• Unhook the spring on the side of the metal box.

Locate the spring.

Unhook the spring on the side of the metal box.

Step 7

• Unscrew the 10mm screw attaching the metal plate to the printer.

Unscrew the 10mm screw attaching the metal plate to the printer.

Step 8

• Lift the transformer out of the printer.

Lift the transformer out of the printer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Helena Yanez                     

Member since: 09/29/2013

446 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 13-1, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 13-1, Forte Fall 2013 



                    CPSU-FORTE-F13S13G1                     


                                            5 Members                     


                                            8 Guides authored