Difficulty
Very easy
Steps
3
Time Required
5 minutes
Sections
1
- Batteries
- 3 steps
Flags
0
BackCanon PowerShot A200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Outer Battery Cover
- Place the camera so the battery cover is facing up, as shown in the picture.
- Gently push on the outer battery cover until you hear a click, and then release.
Place the camera so the battery cover is facing up, as shown in the picture.
Gently push on the outer battery cover until you hear a click, and then release.
1024
Step 2
Inner Battery Cover
- To open the inner battery cover, push down on the grey latch until you hear a click, and then release.
- Remove the dead batteries from the camera.
To open the inner battery cover, push down on the grey latch until you hear a click, and then release.
Remove the dead batteries from the camera.
Step 3
Replacing the Batteries
- After removing the batteries, insert the new batteries in the proper direction.
- Now push the black, inner cover down until you hear a click to secure the batteries in place.
- Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.
After removing the batteries, insert the new batteries in the proper direction.
Now push the black, inner cover down until you hear a click to secure the batteries in place.
Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.
Congratulations, you’re done.
Cancel: I did not complete this guide.
Author
with 10 other contributors
Ellen Chambers
Member since: 01/05/2011
231 Reputation
2 Guides authored
Badges:
3
Team
Cal Poly, Team 7-37, Regan Winter 2011
Member of Cal Poly, Team 7-37, Regan Winter 2011
CPSU-REGAN-W11S7G37
4 Members
10 Guides authored