Canon Powershot A2200 Back Cover Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Back Cover
• 5 steps

Flags

0

• BackCanon PowerShot A2200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• First, remove the batteries and memory card.
• Remove the 5.0 mm black screw with a Phillips #00 screwdriver.
• Remove the 5.0 mm silver screw with a Phillips #00 screwdriver.

First, remove the batteries and memory card.

Remove the 5.0 mm black screw with a Phillips #00 screwdriver.

Remove the 5.0 mm silver screw with a Phillips #00 screwdriver.

1024

Step 2

• Remove the 5.0 mm black screw on the right with a Phillips #00 screwdriver.

Remove the 5.0 mm black screw on the right with a Phillips #00 screwdriver.

Step 3

• Remove the 5.0 mm screw on the left with a Phillips #00 screwdriver.

Remove the 5.0 mm screw on the left with a Phillips #00 screwdriver.

Step 4

• Begin taking off the back cover with a plastic opening tool.
• Begin by wedging the plastic opening tool behind the bottom left corner of the LCD screen as shown.
• Slide the plastic opening tool to the right, along the mating edge, to pry off the back cover.
• Continue taking off the back cover along the left side of the camera as seen in the third picture.

Begin taking off the back cover with a plastic opening tool.

Begin by wedging the plastic opening tool behind the bottom left corner of the LCD screen as shown.

Slide the plastic opening tool to the right, along the mating edge, to pry off the back cover.

Continue taking off the back cover along the left side of the camera as seen in the third picture.

Step 5

• Use the plastic opening tool to separate the top section of the back cover from the frame.
• Once there is enough separation between the back cover and the frame, remove the back cover for replacement.

Use the plastic opening tool to separate the top section of the back cover from the frame.

Once there is enough separation between the back cover and the frame, remove the back cover for replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Jessica Huebschman                     

Member since: 03/22/2015

140 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Baylor, Team 4-5, Williams Spring 2015                        

                                                  Member of Baylor, Team 4-5, Williams Spring 2015 



                    BU-WILLIAMS-S15S4G5                     


                                            4 Members                     


                                            11 Guides authored