Difficulty

Easy

Steps

5

Time Required

                          5 minutes

Sections

1

  • Front Cover
  • 5 steps

Flags

0

  • BackCanon PowerShot A2300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Cover
  • Open the A/V Out Digital port cover on the function button side to reveal a screw.

Open the A/V Out Digital port cover on the function button side to reveal a screw.

1024

Step 2

  • Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom.
  • Screws are small and very easily lost.

Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom.

Screws are small and very easily lost.

Step 3

  • Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow.
  • Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.

Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow.

Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.

Step 4

  • Gently lift the bottom of the front cover to roughly a 30 degree angle.

Gently lift the bottom of the front cover to roughly a 30 degree angle.

Step 5

  • Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.

Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Ashley Fincher

Member since: 03/23/2015

459 Reputation

                                      3 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Baylor, Team 7-14, Williams Spring 2015                        

                                                  Member of Baylor, Team 7-14, Williams Spring 2015 



                    BU-WILLIAMS-S15S7G14                     


                                            4 Members                     


                                            10 Guides authored

Alex Hulinsky - Feb 8, 2016

Reply

Are the screws really hard to remove, or is it just me?