Canon Powershot A2500 Body Casing And Faceplate Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          2 - 5 minutes

Sections

Body Casing and Faceplate
4 steps

Flags

BackCanon PowerShot A2500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Body Casing and Faceplate

Remove the knot holding the wrist lanyard onto the camera

Remove the knot holding the wrist lanyard onto the camera

1024

Step 2

Open the latch at the bottom corner of the device to reveal the battery and SD card housing.
There is an orange latch holding the battery in place which must be pushed back in order to free the battery.
Once the battery is removed push the SD card and this will activate a spring ejecting the card from the camera.

Open the latch at the bottom corner of the device to reveal the battery and SD card housing.

There is an orange latch holding the battery in place which must be pushed back in order to free the battery.

Once the battery is removed push the SD card and this will activate a spring ejecting the card from the camera.

Step 3

Remove the 6 Phillips #00 exterior screws from the camera. Two are located on the bottom and two are located on either side as shown. Notice that one of the screws is under the AV Out Digital flap on the side. All exterior screws should be 2.4mm in length

Remove the 6 Phillips #00 exterior screws from the camera. Two are located on the bottom and two are located on either side as shown. Notice that one of the screws is under the AV Out Digital flap on the side. All exterior screws should be 2.4mm in length

Step 4

Pry apart the camera casing using the plastic opening tool tool provided. Once the casing has begun to separate pull the two sides apart with your hands.
Be careful not to bend the plastic casing to much, as it will crack.

Pry apart the camera casing using the plastic opening tool tool provided. Once the casing has begun to separate pull the two sides apart with your hands.

Be careful not to bend the plastic casing to much, as it will crack.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    James Hickey

Member since: 03/24/2015

393 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       UMass Dartmouth, Team 3-4, Duarte Spring 2015                        

                                                  Member of UMass Dartmouth, Team 3-4, Duarte Spring 2015 



                    UMASSD-DUARTE-S15S3G4                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team