Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
2
- Back Cover
- 2 steps
- Front Cover
- 1 step
Flags
0
BackCanon Powershot A3300 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove four 2.7 mm screws, two on each side, from the camera with a JIS 000 screwdriver.
- Remove one 3.5 mm screw on the bottom of the camera with a JIS 000 screwdriver.
- When removing the front and back housings, be careful to not break the tabs that hook into the top section of the chassis.
Remove four 2.7 mm screws, two on each side, from the camera with a JIS 000 screwdriver.
Remove one 3.5 mm screw on the bottom of the camera with a JIS 000 screwdriver.
When removing the front and back housings, be careful to not break the tabs that hook into the top section of the chassis.
1024
Step 2
- Pull off the back cover.
Pull off the back cover.
Step 3
Front Cover
- Pull the front cover off.
Pull the front cover off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Phillip Chen
Member since: 10/17/2017
434 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
UC Santa Barbara, Team S2-G7, Weedon Fall 2017
Member of UC Santa Barbara, Team S2-G7, Weedon Fall 2017
UCSB-WEEDON-F17S2G7
4 Members
10 Guides authored
