Difficulty

Moderate

Steps

10

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 2 steps
  • Plastic Case
  • 8 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackCanon PowerShot A3400 IS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place thumb on area right next to where it says open and slide to the right to open.

Place thumb on area right next to where it says open and slide to the right to open.

1024

Step 2

  • Remove the battery by pushing the orange object outwards; the battery will spring up and out.

Remove the battery by pushing the orange object outwards; the battery will spring up and out.

Step 3

              Plastic Case
  • Remove the two 5.00 mm screws in the bottom of the casing with a Philips #000 screwdriver

Remove the two 5.00 mm screws in the bottom of the casing with a Philips #000 screwdriver

Step 4

  • Place the camera on to the side that has the image stabilizer label.
  • Remove the 5.00 mm screws that are on this side using the screwdriver.

Place the camera on to the side that has the image stabilizer label.

Remove the 5.00 mm screws that are on this side using the screwdriver.

Step 5

  • Place camera on to the side with the A/V Out Digital Cover facing up.
  • Remove this visible 5.00 mm screw.
  • Pull the A/V Out Digital cover back to uncover the next step.

Place camera on to the side with the A/V Out Digital Cover facing up.

Remove this visible 5.00 mm screw.

Pull the A/V Out Digital cover back to uncover the next step.

Step 6

  • Remove the 5.00 mm screw from behind the cover.

Remove the 5.00 mm screw from behind the cover.

Step 7

  • Make sure the battery cover is open.

Make sure the battery cover is open.

Step 8

  • Turn the camera onto the side with the A/V out Digital cover.
  • Use your finger to pull this tab to the right.

Turn the camera onto the side with the A/V out Digital cover.

Use your finger to pull this tab to the right.

Step 9

  • Remove the lens side by using your fingers or a spudger to pry it gently open.
  • Try to pry it loose all around that side so that it is easier to pull off.

Remove the lens side by using your fingers or a spudger to pry it gently open.

Try to pry it loose all around that side so that it is easier to pull off.

Step 10

  • Using your fingers, pull the screen side gently off.
  • Try to loosen it all around that side so that it is easier to try and pull it off.

Using your fingers, pull the screen side gently off.

Try to loosen it all around that side so that it is easier to try and pull it off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Emily Pretorius

Member since: 01/13/2015

325 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 1-1, Sullivan Winter 2015                        

                                                  Member of USF Tampa, Team 1-1, Sullivan Winter 2015 



                    USFT-SULLIVAN-W15S1G1                     


                                            3 Members                     


                                            8 Guides authored