Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

2

  • Front Cover
  • 2 steps
  • Flash
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCanon PowerShot A4000 IS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Removing the Screws Anchoring the Front Cover
  • Remove the battery and data card. Refer to the Battery Removal and Memory Card Removal guides.
  • Use a Philips head screwdriver (PH000) to remove the screws circled in the picture. Screw Sizes: 4 millimeters.

Remove the battery and data card. Refer to the Battery Removal and Memory Card Removal guides.

Use a Philips head screwdriver (PH000) to remove the screws circled in the picture. Screw Sizes: 4 millimeters.

1024

Step 2

  • Use the spudger tool to gently lever the front cover off.

Use the spudger tool to gently lever the front cover off.

Step 3

              Removing the Flash
  • The flash is not held very securely in the camera so be careful. Make sure someone is holding on to it so it does not fall out.
  • Your flash should come out very easily if you use your spudger to lever it out carefully.
  • Once the bulb piece of the flash is clear of the camera body, simply use your fingers to lift the flash clear of the camera.

The flash is not held very securely in the camera so be careful. Make sure someone is holding on to it so it does not fall out.

Your flash should come out very easily if you use your spudger to lever it out carefully.

Once the bulb piece of the flash is clear of the camera body, simply use your fingers to lift the flash clear of the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Ansley Gardner

Member since: 10/13/2014

761 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Clemson, Team 1-3, Benson Fall 2014                        

                                                  Member of Clemson, Team 1-3, Benson Fall 2014 



                    CLEM-BENSON-F14S1G3                     


                                            3 Members                     


                                            16 Guides authored

Jeiler AV - Aug 19, 2022

Reply

Hello! thank you for this flash replacement guide. I would like to know: can the flash be repaired or is it only replaceable? Thank you!