Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

2

  • Back Cover
  • 5 steps
  • Front Cover
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCanon PowerShot A540

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Turn off the camera.
  • Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

Turn off the camera.

Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

1024

Step 2

  • Turn the camera upside down to view the “Card/Batt. Open” Cover.
  • Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

Turn the camera upside down to view the “Card/Batt. Open” Cover.

Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

Step 3

  • Open “Card/Batt. Open” Cover.
  • Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

Open “Card/Batt. Open” Cover.

Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

Step 4

  • Turn the camera to the right side of the LCD screen.
  • Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

Turn the camera to the right side of the LCD screen.

Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

Step 5

  • Gently remove the back cover.
  • Start at the bottom at the corner of the “Card/Batt. Open” Cover.
  • Then move onto the other edges and the top.
  • It may be tight at the top!

Gently remove the back cover.

Start at the bottom at the corner of the “Card/Batt. Open” Cover.

Then move onto the other edges and the top.

It may be tight at the top!

Step 6

              Front Cover
  • Turn the camera to view the front.
  • Remove the lens guard.
  • Press the lens guard’s button as you turn the guard counterclockwise.

Turn the camera to view the front.

Remove the lens guard.

Press the lens guard’s button as you turn the guard counterclockwise.

Step 7

  • Turn the camera to the side left of the LCD screen.
  • Remove the one (1) 4.0 mm screw with the Phillips head #000 screwdriver.

Turn the camera to the side left of the LCD screen.

Remove the one (1) 4.0 mm screw with the Phillips head #000 screwdriver.

Step 8

  • Remove the front cover gently.
  • When removing the front cover, a thin, black rubber washer may fall off the lens. If it does, make sure to put it back on the lens before reassembly.

Remove the front cover gently.

When removing the front cover, a thin, black rubber washer may fall off the lens. If it does, make sure to put it back on the lens before reassembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Carley Fuller

Member since: 03/23/2015

410 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Baylor, Team 7-12, Williams Spring 2015                        

                                                  Member of Baylor, Team 7-12, Williams Spring 2015 



                    BU-WILLIAMS-S15S7G12                     


                                            3 Members                     


                                            20 Guides authored