Canon Powershot A620 Camera Housing Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 - 30 minutes            

Sections

2

• Batteries
• 2 steps
• Camera Housing
• 9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCanon PowerShot A620

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Open Battery Door               

• Slide the tab on the battery door while pushing the battery door away from you. The battery door should pop open.

Slide the tab on the battery door while pushing the battery door away from you. The battery door should pop open.

1024

Step 2

              Insert Batteries               

• Insert AA batteries according to the diagram printed on the camera.
• Close the battery door.

Insert AA batteries according to the diagram printed on the camera.

Close the battery door.

Step 3

              Side Panel               

• Unscrew the three Phillips #00 1.6x3mm screws on the side.
• Lift loose panel from the case.
• Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.

Unscrew the three Phillips #00 1.6x3mm screws on the side.

Lift loose panel from the case.

Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.

Step 4

              Bottom Panel               

• Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.

Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.

Step 5

              Battery Compartment               

• Open the battery door.
• Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.

Open the battery door.

Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.

Step 6

              Terminal Cover               

• Lift the terminal cover on the side of the camera.
• Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.

Lift the terminal cover on the side of the camera.

Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.

Step 7

              Top Panel               

• Gently pull the top panel to separate it from the case.
• Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.

Gently pull the top panel to separate it from the case.

Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.

Step 8

              Front Panel               

• Gently pull the front panel to separate it from the camera.
• The battery terminals are easy to access from this step.

Gently pull the front panel to separate it from the camera.

The battery terminals are easy to access from this step.

Step 9

              Terminal Cover               

• Gently pull the terminal cover to separate it from the camera.

Gently pull the terminal cover to separate it from the camera.

Step 10

              Memory Card Cover               

• Slide the memory card cover down.
• Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.

Slide the memory card cover down.

Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.

Step 11

              Back Panel               

• Gently pull the back panel to separate it from the camera.

Gently pull the back panel to separate it from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jaime Abraham                     

Member since: 09/08/2014

350 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       CSU Fullerton, Team 1-1, Bruce Fall 2014                        

                                                  Member of CSU Fullerton, Team 1-1, Bruce Fall 2014 



                    CSUF-BRUCE-F14S1G1                     


                                            3 Members                     


                                            6 Guides authored                     

Paolo Ravera - Sep 8, 2016

Reply

Ottima spiegazione: é tutto facile quando la spiegazione é semplice ed univoca. Ma redigere istruzioni semplici é un’arte che non tutti possiedono.