Difficulty
Moderate
Steps
13
Time Required
15 - 30 minutes
Sections
2
- Camera Housing
- 9 steps
- Shutter Button
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackCanon PowerShot A620
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Side Panel
- Unscrew the three Phillips #00 1.6x3mm screws on the side.
- Lift loose panel from the case.
- Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.
Unscrew the three Phillips #00 1.6x3mm screws on the side.
Lift loose panel from the case.
Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.
1024
Step 2
Bottom Panel
- Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.
Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.
Step 3
Battery Compartment
- Open the battery door.
- Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.
Open the battery door.
Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.
Step 4
Terminal Cover
- Lift the terminal cover on the side of the camera.
- Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.
Lift the terminal cover on the side of the camera.
Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.
Step 5
Top Panel
- Gently pull the top panel to separate it from the case.
- Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.
Gently pull the top panel to separate it from the case.
Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.
Step 6
Front Panel
- Gently pull the front panel to separate it from the camera.
- The battery terminals are easy to access from this step.
Gently pull the front panel to separate it from the camera.
The battery terminals are easy to access from this step.
Step 7
Terminal Cover
- Gently pull the terminal cover to separate it from the camera.
Gently pull the terminal cover to separate it from the camera.
Step 8
Memory Card Cover
- Slide the memory card cover down.
- Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.
Slide the memory card cover down.
Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.
Step 9
Back Panel
- Gently pull the back panel to separate it from the camera.
Gently pull the back panel to separate it from the camera.
Step 10
Metal Plate Screws
- Unscrew the Phillips #00 1.6x3mm screw located on the top panel.
Unscrew the Phillips #00 1.6x3mm screw located on the top panel.
Step 11
Metal Plate
- Gently lift the metal plate and move it to the side.
Gently lift the metal plate and move it to the side.
Step 12
Trigger Button Screws
- Unscrew the two Phillips #00 1.6x3mm screws that hold in the trigger button.
Unscrew the two Phillips #00 1.6x3mm screws that hold in the trigger button.
Step 13
Trigger Button
- The trigger button will fall off once the screws have been removed.
The trigger button will fall off once the screws have been removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Jaime Abraham
Member since: 09/08/2014
350 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
CSU Fullerton, Team 1-1, Bruce Fall 2014
Member of CSU Fullerton, Team 1-1, Bruce Fall 2014
CSUF-BRUCE-F14S1G1
3 Members
6 Guides authored
